D-Link DCS-932L User Manual page 45

Section 4 - Security
Router Set-Up and Installation
The following steps generally apply to any router that you have on your network. The D-Link DIR-655 is used as an example to clarify the
configuration process. Configure the initial settings of the DIR-655 by following the steps outlined in the DIR-655 Quick Installation Guide.
3. Access the Router with Your Web Browser
If you have cable or DSL Internet service, you will most likely have a dynamically
assigned WAN IP Address. 'Dynamic' means that your router's WAN IP address
can change from time to time depending on your ISP. A dynamic WAN IP Address
identifies your router on the public network and allows it to access the Internet. To
find out what your router's WAN IP Address is, go to the Status menu on your router
and locate the WAN information for your router (as shown on the next page). The
WAN IP Address will be listed. This will be the address that you will need to type in
your Web browser to view your camera over the Internet.
Your WAN IP Address will be listed on the router's
Status > Device Info page.
D-Link DCS-932 User Manual 45