Gigabyte GA-7PXSL User Manual page 19

Link
Speed LED
Activity LED
10/100 LAN Port
Link
Speed LED
Activity LED
10/100/1000 LAN Port
Speed LED Link
Activity LED
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
MLAN Speed LED:
State Description
Green On 100 Mbps data rate
Green Blink 10 Mbps or 100 Mbps
data rate
Off 10 Mbps data rate
LAN1/LAN2 Speed LED:
State Description
Yellow On 1 Gbps data rate
Yellow Blink Identif y 1 Gbps data
rate
Green On 100 Mbps data rate
Green Blink Identify 100 Mbps data
rate
Off 10 Mbps data rate
Link/Activity LED:
State Description
On Link bet ween system and net work or no
access
Blinking Data transmission or receiving is occurring
Off No data transmission or receiving is occurring
Link/Activity LED:
State Description
On Link bet ween system and net work or no
access
Blinking Data transmission or receiving is occurring
Off No data transmission or receiving is occurring
- 19 - Hardware Installation