Table of Contents
Advertisement
CHANGING THE BULB
1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.
4.3 Hydro easy clean function
The HYDRO EASY CLEAN procedure uses steam to help remove remaining fat and food particles from the
oven.
1. Pour 300 ml of water into the HYDRO EASY CLEAN container at the bottom of the oven.
2. Set the oven function to Static (
3. Set the temperature to the HYDRO EASY CLEAN icon
4. Allow the program to operate for 30 minutes.
5. After 30 minutes switch off the program
and allow the oven to cool down.
6. When the appliance is cool, clean the inner
surfaces of the oven with a cloth.
Warning
Make sure that the appliance is cool before
you touch it.
Care must be taken with all hot surfaces as
there is a risk of burns.
Use distilled or drinkable water.
5. Troubleshooting
5.1 FAQ
PROBLEM
The oven does not heat up
The oven does not heat up
The oven does not heat up
)or Bottom (
)heater
POSSIBLE CAUSE
The clock is not set
The child lock is on
A cooking function and
temperature has not been set
EN 13
SOLUTION
Set the clock
Deactivate the child lock
Ensure that the necessary
settings are correct
Advertisement
Table of Contents
