Advertisement
Available languages
Available languages
Assemble the IGNITER WIRES (lead ELECTRODE WIRES (29) and Side burner wires), SWITCH WIRES (26) and the 9-VOLT
BATTERY (30) in details 11-A.
Step
Assemble the ELECTRONIC MODULE (28) in detail 11-B.
11
E
M
LECTRONIC
ODULE
11-A
9-V
B
30
OLT
ATTERY
E
LECTRONIC
M
M
28
AIN
ODULE
BURNER
ORANGE
ELECTRODE
29
WIRE
S
M
WITCH WIRES
AIN
26
BURNER
(
BLACK WIRES
ORANGE
WITH RED FLAG
ELECTRODE
)
29
CONNECTERS
WIRE
L
EFT
BLUE
11-A. Attach the black SWITCH WIRES (26), with the
S
IDE
red connecters located on the left side of your
BURNER
grill, to the two large pins on the ELECTRONIC
ELECTRODE
MODULE (28). Then attach the two orange
WIRES
lead ELECTRODE WIRES (29) to the pins on
the module marked 1MB and 2MB and the two
blue Side Burner Electrode wires to the pins on
the module marked 1SB and 2SB.
Insert the 9-VOLT BATTERY (30) in the
module, it MUST snap in place.
Caution: Insure that the wires DO NOT
touch hot surfaces such as the grill casting.
Hardware shown actual size
S
G
IDE OF
RILL
Black
Switch
Wires (26)
Orange
Electrode
Wires (29)
(2) Qty.
11-B
13
JS
28
11-B. Locate the front SIDE BRACKET (13) and
attach the ELECTRONIC MODULE (28)
underneath the front bracket flange in the
holes indicated with two screws (JS).
Bundle extra wire length with wire tie (LA) not
shown.
Mounting Holes Detail
Side Frame
Electronic Module
Inside
Outside
Tool Bar
Top View of Bracket (13)
JS
Left front
side of
grill
Side Frame
Tool Bar
11412013FX (Pg. 13)
Advertisement
