To Enter and Change Values
To Enter Decimal Values
Values can be entered and changed using various methods, depending on your
testing needs.
1. Position the cursor in front of the numeric entry field to be changed.
2. Either:
•
Enter the number and unit-of-measure directly using the keypad, or
•
Press the CURSOR CONTROL knob or the ENTER key to highlight the field, and
use the knob, or
•
Use the down-arrow and up-arrow keys to increment or decrement the present
value.
Front-Panel Example
The following front panel operation changes
1. Move the cursor in front of the Sector A Power field.
Enter −73 dBm using the DATA keys
2.
Chapter 3, Operating Overview
To Enter and Change Values
Sector A Power
.
to -73 dBm/BW.
51