To Prevent Damage - Philips Lumea BRI959/00 Manual

12 12 English
- Do not use any pencil or pen to mark the areas to be treated. This
may cause burns on your skin.
- If you have a dark colored skin, be careful with treating a darker
area immediately after a lighter area. The skin tone sensor may not
immediately block the treatment on the darker body area.
- Hair removal by intense pulsed light sources can cause increased
hair growth in some individuals. Based upon currently available
data, the highest risk groups for this response are females of
Mediterranean, Middle Eastern and South Asian heritage treated
on the face and neck.
- Adapter, light exit window and the filter of the attachments can
become very hot after usage. Do not touch the adapter, inner
part of the light exit window and the filter or the inner part of the
attachments without having these cool down.
- This device has a detachable power supply unit. Only use the
detachable supply unit provided with this device (see symbol)
Philips REF: AD2069020020HF.
Note: If you notice a skin tone change from last treatment (e.g. due
to tanning), we recommend you to perform a skin test and to wait
30 minutes before your next treatment.

To prevent damage

- Make sure that nothing obstructs the air flow through the
ventilation slots on the sides and the back of the device.
- Never subject the appliance to heavy shocks and do not shake or
drop it.
- If you take the appliance from a very cold environment to a very
warm environment or vice versa, wait approximately 3 hours
before you use it.
- Store the appliance in a dust free and dry place.
4222_100_6393_3_DFU-Booklet_A5_v1.indd 12 31/10/16 15:17