Starting The Engine - Remote Control Models - Mercury GO BOLDLY 25 EFI Operation, Maintenance And Installation Manual

2. Check the engine oil level.
Without sufficient cooling water, the engine, the water pump, and other
components will overheat and suffer damage. Provide a sufficient supply of
water to the water inlets during operation.
3. Make sure the cooling water intake is submerged.
Starting the Engine ‑ Remote Control Models
Before starting, read the Prestarting Check List, Prestarting Instructions,
and Engine Break‑in Procedure in this section.
1. Open the fuel tank vent screw on the manual venting type tanks.
a
OPERATION
NOTICE
26837
b
c
46290
74
73881
a - Fuel cap
b - Manual vent screw
c - Tab lock
eng