Table of Contents
Advertisement
■ Changing the thread color display
You can display the name of the thread colors or embroidery
thread number.
Memo
• Colors on the screen may vary slightly from actual spool
colors.
a
Press
and use
settings screen.
b
Use
or
of the
Color] or [#123] (thread number).
• When [Name of Color] is selected, the name of the
thread colors is displayed.
• When [#123] is selected, the embroidery thread
number is displayed. Use
menu to select the thread brand.
c
Press
.
or
to display the following
menu to select [Name of
or
of the
■ If the thread breaks or the bobbin runs out of
thread during embroidering
a
Press the "Start/Stop" button to stop the machine.
b
Press
and set the upper thread or bobbin thread.
• If the bobbin thread is almost empty, press
(Thread cutter button) to cut the upper and bobbin
threads, remove the embroidery frame, and then
replace the bobbin with one wound with thread.
c
Press
.
d
Press
,
, or
correct number of stitches before the area where the
thread broke, and then press
• Press
to restart from the beginning.
Note
• It is recommended to stitch over the top of the last two
or three stitches for complete coverage.
Memo
• If you cannot move back to the area where the thread
broke, press
to select the color and move to the
beginning position of that color, then use
to move ahead to slightly before where the thread
broke.
e
Lower the presser foot and press the "Start/Stop"
button to continue embroidering.
■ Resuming embroidery after turning off the
power
The current color and stitch number are saved when
embroidery is stopped. The next time the machine is turned
on, you have the option to continue or delete the pattern.
Embroidering
to move the needle back the
.
,
or
69
4
Advertisement
Table of Contents
