Table of Contents
Advertisement
No. Display
Key Name
5
Needle position setting
6
Stitch width
7
Stitch length
8
L/R Shift
9
Manual adjustment key
0
Page display
A
Edit/stitch switching key
B
Image key
C
Memory key
D
Automatic thread cutting
key
E
Automatic reverse/
reinforcement key
F
Single/repeat sewing key
G
Back to beginning key
H
Mirror image key
I
Size selection key
J Some of the following keys will appear, depending on the selected stitch pattern.
Elongation key
Thread density key
Character spacing key
K
Delete key
Shows single or twin needle mode setting, and the needle stop position.
: Single needle/down position
: Single needle/up position
Shows the stitch width of the currently selected stitch pattern.
Shows the stitch length of the currently selected stitch pattern.
Shows the tendency of left/right of the center line for the original zigzag stitch.
Press this key to display the adjustment screen of the stitch width, stitch length and
"L/R Shift".
Shows additional pages that can be displayed.
Press this key to toggle between the stitch editing screen and the stitch screen.
Shows a preview of the sewn image.
Press
to change the thread color in the image to red, blue, or black.
Press this key to save combined stitch patterns.
Press this key to set the automatic thread cutting function.
Press this key to use the automatic reverse/reinforcement stitch function.
Press this key to choose single stitch pattern or continuous stitch patterns.
Depending on the selected stitch, this key may be disabled. To finish a complete
motif while sewing the stitch pattern continuously, you can press this key while
sewing. The machine will automatically stop when the motif is finished.
When sewing is stopped, press this key to return to the beginning of the stitch
pattern.
After selecting the stitch pattern, use this key to create a horizontal mirror image of
the stitch pattern.
Use this key to select the size of the character stitch (large, small).
When satin stitch patterns
are selected, press this key to choose from 5
automatic length settings, without changing the stitch zigzag width or stitch length
settings.
After selecting the decorative satin stitch pattern
thread density of the stitch pattern.
: Low density
: High density
If the stitches bunch when thread density is changed to
density to
. If you continue sewing when the stitches are bunched, the needle
may bend or break.
Press this key to change the spacing of character stitch patterns.
Spacing changes are valid not only while entering characters but also before and
after the entering of characters.
Press this key to delete the selected stitch pattern. When you make a mistake in
combining stitch patterns, use this key to delete stitch patterns.
Explanation
: Twin needle/down position
: Twin needle/up position
, use this key to change the
, return the thread
LCD Operation
Page
12
1
29
29
29
29
–
28
–
56
28
28
–
–
–
–
–
–
–
–
11
Advertisement
Table of Contents
