Table of Contents
Advertisement
Useful Information
Problem
Time on the unit has
shifted.
The name stored in the
phonebook is not fully
displayed while an outside
call is being received.
Liquid damage
Problem
Liquid or other form of
moisture has entered the
handset/base unit.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Registering a handset to the base unit
1
Handset:
M
N#130
2
Base unit:
Press and hold M
R If all registered handsets start ringing, press M
(KX-TGC412)
3
Handset:
MOKN a Wait until "Base PIN" is displayed. a Enter the base unit PIN (default: "0000").
a MOKN
R If you forget your PIN, contact an authorised service centre.
Deregistering a handset
1
M
N#131
R All handsets registered to the base unit are displayed. (KX-TGC412)
2
MbN: Select the handset you want to cancel. a MOKN
3
MbN: "Yes" a MOKN a M
32
0906_TGC41xCX (en)_ver002.pdf 32
Cause/solution
R Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to "Manual" (off) (page 19).
R Edit the phonebook entry name to fit in 1 line of text (page 16).
Cause/solution
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
N for about 5 seconds.
N
N again to stop, then repeat this step.
6/9/2016 3:19:58 PM
Advertisement
Table of Contents
