Table of Contents
Advertisement
Available languages
Available languages
Product Dimensions
A*
F
A. 35
3
/
" ± 1/8" (90.8 cm ± 0.3
4
cm) cooktop height (minimum)
with leveling legs screwed all
the way in*
B. Model/serial/rating plate
(located behind the control
panel)**
C. 47
/
" ± 1/8" (119.7 cm ±
1
8
0.3 cm) overall height
(minimum) with leveling legs
screwed all the way in*
* Range can be raised approximately 1" (2.5 cm) by adjusting
the leveling legs.
** Model/serial/rating plate may be rotated up from behind the
control panel for viewing from the front of the range.
*** Excludes handle. Dimension given is from wall to front of
oven door and will vary based on electric outlet receptacle
installation.
B**
C*
D
E***
D. 28
1
/
" ± 1/4" (72.4 cm ± 0.6
2
cm) depth with handle
E. 26
/
" ± 1/8" (66.4 cm ± 0.3
1
8
cm)***
F. 29
/
" ± 1/16" (76.0 cm ±
15
16
0.2 cm) width
Cabinet Dimensions
Cabinet opening dimensions shown are for 25" (63.5 cm)
countertop depth, 24" (61.0 cm) base cabinet depth and
36" (91.4 cm) countertop height.
IMPORTANT: If installing a range hood or microwave hood
combination above the cooking surface, follow the range hood
or microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.
A freestanding range may be installed next to combustible
walls with zero clearance.
A
I
A. 18" (45.7 cm) upper cabinet to
countertop
B. 13" (33.0 cm) upper cabinet
depth
C. 30" (76.2 cm) min. opening
width.
D. For minimum clearance to the
top of the cooktop, see
NOTE.
E. 30" (76.2 cm) min. opening
width
Proper positioning of outlet shown above.
* Nothing located in shaded areas can extend more than 1½"
(3.8 cm) from wall or range will not slide all the way back.
NOTE: 24" (61.0 cm) minimum when bottom of wood or
metal cabinet is covered by not less than 1/4" (0.64 cm) flame
retardant millboard covered with not less than No. 28 MSG sheet
steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum
or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an unprotected wood or metal cabinet.
B
D
C
E
J
G
F
H
K
F. Cabinet door or hinge should
not extend into cutout*
G. 1½" (3.8 cm) min. from right
side cabinet
H. 2" (5.1 cm) min. from floor
I. 7" (17.8 cm) height
J. 8" (20.3 cm) width
K. 3½" (8.91 cm) min. from floor
3
Advertisement
Table of Contents
