Updating The Tv's Software - Samsung HG49RU750AJ Install Manual

Updating the TV's Software

DO NOT turn off the TV's power until the update is complete. The TV will turn off and on automatically after completing
the software update. Video and audio settings will be reset to their defaults after a software update. We recommend
you clone the TV's settings so that you can easily reset them after the upgrade.
• For more information about the USB cloning function, refer to page 33.
Updating through a USB device
To update the TV's software, follow these steps:
1. Insert a USB device containing the software update file into the USB port of the TV.
2. Run SW Update.
– Admin menu > System > SW Update
3. The TV displays a pop-up message that checks for the updated version.
4. Move the focus to OK, and then press the Select button on the remote control.
– Please be careful to not disconnect the power or remove the USB device while upgrades are being applied. The
TV will turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the
upgrades are complete.
English - 39