Admin Menu Items - Samsung HG49RU750AJ Install Manual

Admin menu items

To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then
turn on again. Any changes you made are saved.
• The menu items may not be supported depending on the models.
Admin menu Item
Hospitality Mode
SI Vendor
MDC ID Settings
SI Config
TV Version
Power On Channel
Power On Channel Num
Power On Channel Type
Power On Volume
Power On
Power On Volume Num
Min Volume
Max Voume
Power On Source
Power On Option
Description
Select Hospitality Mode.
• Interactive: TV works with an SI STB or SBB.
• Standalone: TV works alone, without an SI STB or SBB.
• Interactive: Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere /
Quadriga / ETV / IBahn / Magilink / Otrum / Siemens / Amino / MDC / Enseo
• Standalone: OFF / Movielink / Swisscom / SSCP
Assigns an individual MDC ID.
• This function only available when MDC is selected in Interactive SI Vendor.
Select the TV version. (1.0 / 2.0)
• This function only available when Magilink is selected in Interactive SI Vendor.
Set the channel to display when the TV is turned on.
• User Defined: Lets you set the channel number manually on Power On Channel
Num. See Power On Channel Num below.
• Last Saved: If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
Select the type of the channel will be displayed when the TV is turned on.
ATV (analogue aerial band), DTV (digital aerial band), CATV (analogue cable band),
CDTV (digital cable band), IPTV (IP channel, IPTV is set when deployed from solution.)
Set volume level when the TV is turned on.
• User Defined: Lets you set volume level manually.
• Last Saved: When the TV is turned on, it returns to the volume that had been set
when the power had been turned off.
The TV turns on with set volume level.
The minimum volume level the user can set.
The maximum volume level the user can set.
Select the input source to be displayed when the TV is turned on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
• Last Option: Returns to its last power state. If it was in standby mode, it returns to
standby mode. If it was on, it turns on.
• Power ON: When the power returns, the TV turns on.
• Standby: When the power returns, the TV enters the standby mode.
English - 28