Samsung HG49RU750AJ Install Manual page 19

Select your TV source
• Select the type of broadcast signals the TV receives. Then, channel scanning starts.
8
• After channel scanning is completed, select Next or press the right directional button on the remote control.
• When the RF cable is not connected, this step is skipped.
Setting the current time
• If the TV is tuned to digital broadcast channels, and these channels transmit date and time information, set Set
Current Time to Auto. The TV will set the date and time automatically.
9
• If the TV is not tuned to digital broadcast channels, set Set Current Time to Manual, and then set the date and time on
the TV manually.
– Select your time zone.
– Set DST (Daylight Saving Time) to No / Yes to apply to the TV.
TV setup summary
10
Displays the information set on the TV.
Setup complete
• Select apps to add to Home Screen, and then try using your remote control and see if it works.
11
• Select the Start Watching TV button to complete the Initial Setup. Then Admin menu appears. Press Power button to
exit.
English - 19