Table of Contents
Advertisement
Installation:
1.
Clean dirt and grass from the blades, blade disc, and the inside on
the cutter housing.
2.
Install the blade, spring washer, blade washer and self-lock nut to
the blade disc using the blade setting bolt as described below.
SELF-LOCK NUT (2)
BLADE WASHER (2)
SPRING WASHER (2)
BLADE (2)
BLADE SETTING BOLT (2)
3.
Tighten the self-lock nuts with a torque wrench. Prevent the blade
disc from turning when tightening the self-lock nuts, tighten the self-
lock nuts to the specified torque.
The blade setting bolts are specially designed for the mower.
Should you ever have to replace them, use only Honda genuine
parts. Otherwise, the blade may detach from the mower and cause
serious injury.
Self-lock nuts tightenig torque:
34.3 N·m (3.5 kgf·m)
58
BLADE DISC
Advertisement
Table of Contents
