Biostar K8NHA Grand Bios Setup Manual page 27

Biostar k8nha grand motherboard: frequently asked questions
Hide thumbs Also See for K8NHA Grand:
Table of Contents

Advertisement

Resources Controlled By
By Choosing "Auto(ESCD)" (default), the system BIOS will detect the system resources
and automatically assign the relative IRQ and DMA channel for each peripheral.By
Choosing "Manual", the user will need to assign IRQ & DMA for add-on cards. Be sure
that there are no IRQ/DMA and I/O port conflicts.
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending on the type
of device using the interrupt. When you press the "Press Enter" tag, you will be directed to
a submenu that will allow you to configure the system interrupts.
configurable when "Resources Controlled By" is set to "Manual".
IRQ-3
assigned to
IRQ-4
assigned to
IRQ-5
assigned to
IRQ-7
assigned to
IRQ-9
assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
PCI / VGA Palette Snoop
Choose Disabled or Enabled. Some graphic controllers which are not VGA compatible
take the output from a VGA controller and map it to their display as a way to provide boot
information and VGA compatibility.
However, the color information coming from the VGA controller is drawn from the palette
table inside the VGA controller to generate the proper colors, and the graphic controller
needs to know what is in the palette of the VGA controller. To do this, the non-VGA
graphic controller watches for the Write access to the VGA palette and registers the snoop
data. In PCI based systems, where the VGA controller is on the PCI bus and a non-VGA
graphic controller is on an ISA bus, the Write Access to the palette will not show up on the
ISA bus if the PCI VGA controller responds to the Write.
In this case, the PCI VGA controller should not respond to the Write, it should only snoop
the data and permit the access to be forwarded to the ISA bus. The non-VGA ISA graphic
controller can then snoop the data on the ISA bus. Unless you have the above situation,
you should disable this option.
Disabled(default)
Enabled
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
Disables the function.
Enables the function.
26
This is only

Advertisement

Table of Contents
loading

This manual is also suitable for:

K8nha-g

Table of Contents