Table of Contents
Advertisement
MC97 Modem
This option allows you to control the onboard MC97 modem.
The Choices: Auto (default), Disabled.
MAC LAN (nVIDIA)
This option allows you to change the state of the onboard MAC LAN.
The Choices: Auto (Default), Disabled.
Onboard LAN Boot ROM
This item allows you to enable or disable Onboard LAN Boot ROM.
The Choices: Disabled (default), Enabled.
Onboard RAID ROM
This item allows you to enable or disable Onboard RAID ROM.
The Choices: Disabled (default), Enabled.
Onboard SATA ROM
This item allows you to enable or disable Onboard SATA ROM.
The Choices: Disabled (default), Enabled.
Reltek Giga LAN Boot ROM
This item allows you to enable or disable Reltek Giga LAN Boot ROM.
The Choices: Disabled (default), Enabled.
Reltek Mega LAN Boot ROM
This item allows you to enable or disable Reltek Mega LAN Boot ROM.
The Choices: Disabled (default), Enabled.
Wireless LAN Boot ROM
This item allows you to enable or disable Wireless LAN Boot ROM.
The Choices: Disabled (default), Enabled.
Super IO Device
Press Enter to configure the Super I/O Device.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If install and FDC or the system has no
floppy drive, select Disabled in this field.
The Choices: Enabled (default), Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second serial ports.
The Choices: 3F8/IRQ4 (default), Disabled, Auto, 2F8/IRQ3,
3E8/IRQ4, 2E8/IRQ3.
Onboard Serial Port 2
18
Advertisement
Table of Contents
