Table of Contents
Advertisement
Chapter 2: Hardware Installation
2.1
C
ENTRAL
Special Notice:
Remove Pin Cap before installation, and make good preservation for future use.
When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin
legs won't be damaged.
pin cap
Step 1: Pull the lever sideways away from the socket and then raise the
lever up to a 90-degree angle.
Step 2: Look for the black cut edge on socket, and the white dot on CPU
should point wards this black cut edge. The CPU will fit only in the
correct orientation.
Step 2-1:
I86PE-A7
P
U
(CPU)
ROCESSING
NIT
6
Advertisement
Table of Contents
