Connecting To Video Equipment Or A Computer - Sony VPL-VZ1000ESLA Operating Instructions Manual

Connecting to Video Equipment or a Computer

You can enjoy high picture quality by connecting a DVD player/recorder, Blu-ray Disc player/recorder, or PlayStation
equipped with HDMI output to the HDMI input of the unit.
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When
pulling out a cable, be sure to pull it out from the plug, not the cable itself.
• Refer to the operating instructions of the connected equipment.
Right side of the unit
Rear side of the unit
: Video signal flow
Notes
• Use a Premium High Speed HDMI cable. If using a cable other than a Premium High Speed cable, 4K video images may not be properly
displayed.
• When connecting an HDMI cable to the unit, make sure the V mark on the upper part of the HDMI input of the unit and the v mark on the
connector of the cable are faced at each other.
• If the picture from equipment connected to the unit with an HDMI cable is not correct, check the settings of the connected equipment.
• If you set your computer, such as a notebook type, to output the signal to both computer's display and this equipment, the picture of the
equipment may not appear properly. Set your computer to output the signal to only the external monitor. For details, refer to the computer's
operating instructions supplied with your computer. For settings of the computer, consult with the manufacturer of the computer.
to HDMI input
to HDMI input
Use a Premium High Speed HDMI cable on which
the cable type logo is specified.
Equipment with HDMI
output connectors
HDMI cable (not supplied)
9
Computer
AV amplifier Speakers
to HDMI
output
®