Table of Contents
Advertisement
Function Menu
The Function menu is used for changing the settings of the various functions of the unit.
Setting items
3D Settings
2D-3D Display Sel.
3D Depth Adjust
Simulated 3D Effect
Dynamic Range
Description
You can change the settings of the 3D function.
For Switching the video images to "2D" or "3D."
Auto: Displays 3D video images when HDMI signals with 3D information* are input. Displays 2D
video images when other signals are input.
3D: Displays 3D video images according to the 3D system selected in "3D Format." However, when
HDMI signals with 3D information are input to the unit, displays 3D video images according to the 3D
system of those HDMI signals.
3D Format: Set the 3D system when the input HDMI signals do not include 3D information.
Simulated 3D: Converts 2D video images to 3D video images. The setting can be made only for input
the HD signals.
The simulated 3D feature may have limited effect, depending on the video source.
There are differences in perception of 3D video images among individuals.
Side-by-Side: Select this to display 3D images as two similar images, side-by-side.
Over-Under: Select this to display 3D images as two similar images, one above the other.
2D: Displays 2D video images.
* The 3D information is additional information to differentiate 3D. Some HDMI signals have additional
information to differentiate 3D and some HDMI signals have none.
Tips
• "2D-3D Display Sel." cannot be set to "3D" for some video sources. For available 3D signals, see
"Compatible 3D Signals" (page 40).
• The simulated 3D feature may have limited effect, depending on the projection image size (100 to 120
inches recommended) and the video source.
• The menu display has a ghost while a 3D video image is displayed and is best viewed with the 3D
glasses.
For adjusting the depth of the 3D video images on the projection surface. The setting can be made only
when a 3D Format other than "Simulated 3D" is selected.
Depth
Front
We recommend that "3D Depth Adjust" be set to "0." The 3D video images may be difficult to perceive,
depending on the setting of "3D Depth Adjust."
For adjusting the 3D effect when 2D content is converted to 3D video images. You can select the effect
from among "High," "Middle," and "Low."
Tips
• There are differences in perception of 3D video images converted by the simulated 3D function
among individuals.
• Use the simulated 3D function taking into account that the picture will provide a different look from
the original images, because this function converts the video images.
• Note that if the unit is used for profit or for public viewing, displaying 2D video images as 3D video
images by converting to the simulated 3D may constitute an infringement of the rights of authors or
producers, which are legally protected.
Sets the video input level for HDMI 1, HDMI 2, HDMI 3 and HDMI 4 connectors.
Auto: Sets the video input level automatically.
Limited: The video input level is set for signals that are equivalent to 16-235.
Full: The video input level is set for signals that are equivalent to 0-255.
Note
If the video output setting of the connected HDMI device is not set correctly, light and dark parts of the
video may appear too light or too dark.
Normal
Depth
24
Advertisement
Table of Contents
