Store Radio Stations Automatically - Roadstar HIF-8892D+BT User Manual

4 English
when playing 45 rpm records;
3. Set the [SPEED SELECTOR] (33) to 33, 45 or 78 rpm according to the record;
4. Release the tonearm clamp,
5. Lift up the [TONEARM] (34) with the [LIFT LEVER] (31);
6. Move the [TONEARM] (34) to the beginning of the record;
7. Lift down the [TONEARM] (34) with the [LIFT LEVER] (31);
8. When the record is finished the plate will automatically stop turning. To stop
nually, lift up the tonearm from the record and return it to the rest support.
Note: Do not stop or turn the plate manually.
When the unit is moved or transported:
Lock the [TONEARM] (34) with the
•
Place the protective cap on the stylus (even when not in use).
•
RADIO OPERATION
1. Select "TUNER" mode by pressing the [FUNCTION] button (2) repeatedly;
2. Press the [SKIP -/+] buttons (10/11) to manually select the frequence or press
and hold (2 seconds) to scan the next/previous available station.
Note: For a better reception reorient the antenna (29).

STORE RADIO STATIONS AUTOMATICALLY:

Press and hold the [SCAN] button (15) and the radio will automatically scan the radio.
During the scanning process, the radio will save the scanned stations sequentially in-
to the memory.
PRESET
There are 30 presets available for FM.
1. Set the desired radio station frequency as explained previously;
2. Press the [PRESET] button (16);
3. Choose the number of preset using the [PRESET -/+] buttons (12/13);
4. Confirm with the [PRESET] button (16).
Press the [PRESET -/+] buttons (12/13) to recall a preset station.
FM RADIO SETTING
During FM radio mode, press and hold the menu button , lcd will show "Scan Setting",
then press the [SKIP -/+] buttons (10/11) repeatedly to select below:
Strong stations/All stations: you can choose Strong o all stations, [SKIP -/+] but-
tons (10/11) to select and press [SELECT] (9) to confirm.
Manual tune: Press repeatedly [SKIP -/+] buttons (10/11) to select radio frequency
manually.
STORE a radio station: Select with the [SKIP -/+] buttons (10/11) preferred station,
long press [MODE/MEM] (16) button and select with [SKIP -/+] buttons (10/11) the
location to memorize. press [SELECT] (9) to confirm.
Full scan: unit will automatically scan those available dab stations.
Manual tune: , then press pressing [SKIP -/+] (10/11) buttons to select dab radio fre-
quency manually, press [SELECT] (9) button again to confirm if desired frequency is
found.
Press [MENU/INFO] (15) button you can choose Audio Setting: you can select MONO
or Stereo mode.
and remove the stylus protector;
tonearm clamp.
ma-