Table of Contents
Advertisement
(5) Adjusting the position of the feeder bowl
Loosen six lock nuts ❶ in feeder base ❷ , and adjust the
height so that the feeder bowl comes above when the
difference in level between the outlet of buttons of the feeder
bowl and the pan is within 0.5 mm.
If the difference in level is excessive, two buttons enter the
feed plate in piles. So, be careful.
❷
❶
Within 0.5 mm
Outlet of buttons
Pan
Appropriate clearance "ℓ" between the feeder bowl and the
pan is approximately 1 to 1.5 mm.
Feeder bowl installing screw
Loosen adjusting nut ❶ , and move the whole button feeder to
adjust the position.
To make a fine adjustment, loosen the feeder bowl installing
screw, and change the position of the feeder bowl.
Pan
ℓ
27
−
−
Advertisement
Table of Contents
