Honeywell First Alert FA168CPS User Manual page 44

Fire Alarm System (Continued) Fire Alarm System (Continued) Fire Alarm System (Continued) Fire Alarm System (Continued)
THIS SECTION APPLIES ONLY TO RESIDENTIAL SYSTEMS
Manually 1. Should you become aware of a fire emergency before your smoke or
Initiating
a Fire Alarm
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify
4.
Using the Panic
Key(s) Assigned
for FIRE
Emergency
– 44 –
heat detectors sense the problem, go to your nearest keypad and
manually initiate an alarm by pressing the panic key assigned for
FIRE emergency for 2 seconds. If a key pair has been assigned for
fire, press both keys at the same time. See the Using the Panic Keys
section below for further details.
your local Fire Department immediately.
If no flames or smoke are apparent, investigate the cause of the
alarm. The zone number(s) of the zone(s) in an alarm condition will
be displayed at the keypad.
A key or key pair may have been assigned for manually initiating a
FIRE alarm. See the Panic Keys section for key assignments.
For convenience, indicate the key or key pair assigned for fire below.
In divi d ua l K e y s
A B C
O R
Key Pai r s
1
O F F
∗
R E A D Y
3
and
S T A Y
DISPLAYS FOLLOWING MANUAL INITIATION OF A FIRE ALARM
F I R E 9 5
ALPHA DISPLAY KEYPAD
Press
the individual key assigned for fire
∗
and
( z o n e 9 5 )
R E A D Y
#
and
( z o n e 9 9 )
#
( z o n e 9 6 )
95 95 95 95
ALARM
FIRE
FIXED-WORD KEYPAD
for 2 seconds.
Press
the key pair
at
assigned for fire
the same time.
AC