Advertisement
Step 20
SQ33 ctr
(8)
1
From inside the building, put the
bottom of the right door assembly
(on your left when you are inside the
building) behind door jamb into the
front frame track.
2
Position the top of the door so that
the holes in the door line up with the
holes in the door slides.
3
Fasten the door to the door slides
using two #10Bx1/2" (13 mm) screws
per door slide.
NOTE
The holes in the door slides allow
you to adjust the doors. Place the
door in the middle holes.
4
Repeat steps 1 through 3 for the
left door.
Keep this Owner's Manual and Assembly Instructions for future reference.
Parts Needed For
Door Installation & Adjustment
Door Track
Adjustment Holes Allow
Doors to Meet Evenly
Along Their Length
Horizontal Door Brace
Gable
Door Slide
Front Floor Frame Assembly
Adjustment Holes
Right Door
33
Right Door Assembly (1)
Left Door Assembly (1)
STEP
STEP
2
1
Door Slide
#10Bx1/2" (13 mm)
Screw
STEP
3
STEP
Left Door
4
Advertisement
