Box Contents; Connection Diagram; Installation; Rear Panel Overview - Alto TOURMAX SX115 Quick Start Manual

BOX CONTENTS

•
TOURMAX speaker
•
Quickstart Guide
•
Safety Instructions & Warranty Information Booklet

CONNECTION DIAGRAM

Speaker
*Note: Microphones, mixer, amp, and cables are not included.

INSTALLATION

This speaker should be installed securely on a stand on the
floor, according to its maximum weight, or suspended from its
suspension points (M10 x 1.5PH, 30mm length) (see image
for an example). We do NOT recommend suspending
multiple speakers in a vertical array.

REAR PANEL OVERVIEW

1. INPUT – Use a standard Speakon* cable (not included) to connect your
powered amplifier to this input.
2. THRU – Use a standard Speakon cable (not included) to connect this
jack to the input of another speaker (i.e., another TOURMAX speaker).
* Speakon is a trademark of Neutrik® AG, registered in the U.S. and other countries.
Microphones*
Mixer*
INPUT
Powered Amplifier*
Example:
2
Power
OUTPUT
Speaker
Eyebolt
Dust cover
Suspension
point
1 2