AVERATEC AV3120V User Manual page 56

Chapter 6 — Using the BIOS Setup Utility
Field
1st Boot Device
2nd Boot Device
3rd Boot Device
Bootup Num-Lock
Display Expansion
Support
Password Check
Share Memory Size
Setting
1st Boot Device default is USB FDD.
Disabled
2nd Boot Device default is CDROM.
IDE-0
3rd Boot Device default is IDE-0.
CDROM
Off Use this field to initially disable the
NumLock feature of the internal
On
keyboard when the notebook starts.
The default is Off.
Disabled If you are using DOS or a 640 x 480
resolution to run windows, the display
will not fill the entire screen. Enable
Enabled
this mode to expand the display to the
entire screen. The default is Enabled.
Setup The default value is Setup, which
specifies that a password is only
required to enter the setup utility.
Always If Always is selected, the password is
required when the system is booted up
or resuming from a suspend-to-disk.
8MB This field displays the amount of
memory detected by the system during
16MB
bootup. It allows you to select shared
32MB
memory size for VGA usage. They are
display only fields.
64MB
52
Function