Table of Contents
Advertisement
Using the BIOS Setup Utility —Navigating and Entering Information in BIOS
Navigating and Entering Information in BIOS
Use the following keys to move between fields and to enter information:
Key
Del
ESC
Up, down keys (
PgUp or PgDn
Enter
F2 or F3
F10
Press Del to start the BIOS utility after
turning on the computer.
Press Esc to exit any section. If you wish to
exit the BIOS utility without saving changes,
go to the main menu, then press Esc.
Push the up and down arrow keys to move
)
among selections, then press Enter to make
a selection.
Use the PgUp, PgDn keys to modify a field.
Use PgUp to increase a value, such as a date
or number, and PgDn to decrease it. For
other types of choices, such as "enabled," or
"disabled," use either key to move between
choices.
Press enter to make a selection
Pressing either key changes the color of the
graphic display.
Press F10 to save changes, then exit.
47
Function
Advertisement
Table of Contents
