Table of Contents
Advertisement
5.6.3
Boot Settings Configuration
Boot Settings Configuration
Quick Boot
Bootup Num-Lock
OS Select For DRAM >64MB
Full Screen LOGO
Halt On
↑↓ : Select Item
F1:Help
→←: Select Menu
ESC: Exit
Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When
Enabled, the system skips certain tests while booting. Configuration
options: [Disabled] [Enabled]
Bootup Num-Lock [On]
Enables or disables the floppy seek feature while booting. Setting to
Enabled, clears the chassis open status. Configuration options: [On] [Off]
OS Select For DRAM > 64MB [Non-OS2]
Select OS2 only if you are running OS/2 operating system with greater
than 64M of RAM on the system. Configuration options: [Non-OS2] [OS2]
Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Make sure that the above item is set to [Enabled] if you want to use the
ASUS MyLogo™ feature.
Halt On [All,But Kayboard]
Allows you to select error report type.
Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But
Diskette] [All, But Disk/Key]
ASUS V-Series M2NC61S
Phoenix-Award BIOS CMOS Setup Utility
Boot
[Enabled]
[On]
[Non-OS2]
[Enabled]
[All, But Keyboard]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
F5: Setup Defaults
F10: Save and Exit
5-29
Advertisement
Table of Contents
