Table of Contents
Advertisement
5.5.3
APM Configuration
Restore on AC Power Loss
PWR Button < 4 secs
Power On By PCI Devices
Power On By External Modems
Power On by RTC Alarm
x
Date (of Month) Alarm
x
Time (hh:mm:ss) Alarm
Power On By PS/2 Mouse
Power On by PS/2 Keyboard
F1:Help
ESC: Exit
Restore on AC Power Loss [Power Off]
Select whether or not to restart the system after AC power loss.
Configuration options: [Power off] [Power On] [Last State]
PWR Button < 4 secs [Instant-Off]
When set to [Instant-Off], the system will go soft-off when power button
is pressed for less than 4 seconds. [Suspend] means holding the power
for more than 4 seconds to power off the system. Configuration options:
[Instant-Off] [Suspend]
Power On By PCI Devices [Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI/PCIE
devices & NV Onboard LAN. Configuration options: [Disabled] [Enabled]
Power On By External Modems [Enabled]
Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Set the Date, Time resume by Alarm. Configuration options: [Disabled]
[Enabled]
Power On By PS/2 Mouse [Disabled]
Configuration options: [Disabled] [Enabled]
Power On by PS/2 Keyboard [Disabled]
Configuration options: [Disabled] [Enabled]
5-26
Phoenix-Award BIOS CMOS Setup Utility
Power
APM Configuration
0 : 0 : 0
↑↓ : Select Item
→←: Select Menu
[Power Off]
[Instant - Off]
[Disabled]
[Enabled]
[Disabled]
0
[Disabled]
[Disabled]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
F5: Setup Defaults
F10: Save and Exit
Chapter 5: BIOS setup
Advertisement
Table of Contents
