Table of Contents
Advertisement
6.
Remove the display cable routing guide from the display enclosure.
7.
Open the display to rotate the hinges upward to an angle (1).
8.
Separate the display assembly from the computer (2).
If it is necessary to replace any of the display assembly subcomponents:
1.
Flex the inside of the top edge (1), left (2) and right sides (3), and the inside of the bottom edge (4) of
the display bezel until the bezel disengages from the display enclosure.
68
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Advertisement
Table of Contents
