Table of Contents
Advertisement
Machine actions
There is a lot of ground cof-
fee under the brew group.
The machine grinds the
coff ee beans but no coff ee
comes out.
(See note)
Coff ee is too weak.
(See note)
Coff ee is brewed slowly.
(See note)
Coff ee leaks out of the
dispensing spout.
Causes
Coff ee is not suitable for auto-
matic machines.
There is no water.
The brew group is dirty.
This might occur when the ma-
chine is automatically adjusting
the dose.
The dispensing spout is dirty.
This might occur when the ma-
chine is automatically adjusting
the dose.
The coff ee is too coarse.
The coff ee grind is too fi ne.
Circuits are clogged.
The brew group is dirty.
The dispensing spout is clogged.
Note:
These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case wait until
the machine performs a self-adjusting operation as described in chapter
"Saeco Adapting System".
ENGLISH
Solutions
It may be necessary to change the
type of coff ee or the coff ee grinder
settings.
Fill the water tank and prime the
circuit (chapter "Using the Machine
for the First Time").
Clean the brew group ("Weekly
cleaning of the brew group"
chapter).
Brew a few cups of coff ee as de-
scribed in chapter "Saeco Adapting
System".
Clean the dispensing spout.
Brew a few cups of coff ee as de-
scribed in chapter "Saeco Adapting
System".
Change coff ee blend or adjust the
grind as explained in chapter "Ad-
justing the ceramic coff ee grinder".
Change coff ee blend or adjust the
grind as explained in chapter "Ad-
justing the ceramic coff ee grinder".
Perform a descaling cycle.
Clean the brew group ("Weekly
cleaning of the brew group"
chapter).
Clean the dispensing spout and its
holes.
73
73
Advertisement
Table of Contents
