Table of Contents
Advertisement
2
1
17
When this icon is displayed, the water tank is empty. Repeat steps 13 –
17. Then continue to step 19.
18
When the water tank is empty, remove it from the machine. Rinse it
and fi ll it up to the MAX level with fresh water. Place the water tank
back into the machine.
19
Remove and empty the container.
20
When the amount of water needed for the rinse cycle has been com-
pletely dispensed, this icon on the side is displayed. Press the "
button to quit the descaling cycle.
21
The machine automatically primes the circuit.
22
The machine now carries out the warm-up and automatic rinse cycle to
prepare for product brewing.
23
Empty the drip tray and place it back.
24
The descaling cycle is now completed.
1
25
Place back the "INTENZA+" water fi lter into the water tank if it was
installed.
Note:
At the end of the descaling cycle, wash the brew group as described in the
"Weekly cleaning of the brew group" chapter.
The two rinse cycles are performed in order to have the circuit cleaned
with a preset amount of water to ensure proper machine performance.
If the water tank is not fi lled up to MAX level, the machine might require
three or more cycles.
ENGLISH
61
61
"
Advertisement
Table of Contents
