Sony Ericsson W800iUG Manual page 8

To install the USB drivers
1 Turn on your computer and insert
the CD that came with your phone
into the CD drive of your computer.
If the PC Suite installation window
opens, simply close it as it is not
needed here.
2 Turn on your phone and connect
the USB cable to a USB port
on the computer and to the phone.
The "Found New Hardware Wizards"
starts on the computer.
3 Computer: Click Install the software
automatically and click Next.
4 The wizard should find the USB
software drivers automatically.
Click Finish.
5 Repeat steps 3 and 4 until all five
drivers are installed.
Each time you connect the phone
and the computer using the USB cable,
a dialog box on the computer asks you
to make a choice of what to do with files
on the removable disk (i.e. the Memory
Stick in your phone). Select Take no action
to continue preparations for using
Disc2Phone.
8
To install Disc2Phone
1 Turn on your computer and insert
the CD that came with your phone
into the CD drive of your computer.
The CD starts automatically and the
installation window opens.
2 Computer: Select a language
and click OK.
3 Computer: Click Install Disc2Phone and
follow the instructions on the screen.
When the installation is complete,
the Disc2Phone icon appears
on the desktop of your computer.
To transfer music
1 Make sure your phone is turned
on and connected to the computer
with the USB cable.
2 Computer: Double-click
the Disc2Phone icon on the computer
desktop to open Disc2Phone.
3 Computer: For details on transferring
music, please refer to Disc2Phone Help.
Click in the top right corner
of Disc2Phone window.
Do not remove the USB cable from
the phone or computer during transfer,
as this may corrupt the Memory Stick.