Table of Contents
Advertisement
To set up using the wizard
1. Scroll to Internet services, and select a homepage
(for example Sony Ericsson).
2. Create now? appears. Press
3. Enter a name for the profile. Press
4. Select Connect Using. Press
5. Select New Account. Press
6. Select an account type, GSM Data or GPRS Data.
7. Select New Account, and press
following:
• A name for the data account.
• For GSM enter phone number and for GPRS enter
APN (Access point name address) – the address
of the external data network you want to connect
to, either an IP address or a text string.
• Use your user ID to log on to the external data
network.
• Use your password to log on to the external data
network.
• Save the new data account.
• Select the new data account to be used.
8. Enter IP address for the gateway.
9. Save the new profile.
.
Yes
.
Ok
.
Edit
.
Add
, enter the
Edit
Enter or edit settings manually
You can manually enter or edit settings information
from your network operator or service provider.
To create profile settings manually
1. Scroll to Connect, WAP Options, WAP Profiles.
2. Select New Profile and press
profile, or select an existing profile and press
edit an existing profile.
• See steps 3 - 7 in "To set up using the wizard" on
page 59.
Note: If no settings exist, you must enter data
account (connection settings) as well as profile
settings.
3. Enter or edit settings until all required information is
entered. Press
.
Save
To edit profile settings
1. Scroll to Connect, WAP Options, WAP Profiles.
2. Select an existing profile and press
existing profile.
When editing a profile, you can do the following:
Setting up mMode and Email
to create a new
Add
to
Edit
to edit an
Edit
59
Advertisement
Table of Contents
