Sony Ericsson T616UG Manual page 22

All signals except the alarm and timer signals are
turned off.
To compose a ring tone or melody
1. Scroll to Pictures & Sounds, Music DJ.
2. Choose to insert a selection of pre-recorded music
blocks. You can choose from four different selections.
3. Copy and paste these blocks to build up your melody.
to play the melody and view other options.
4. Select
More
Note: To edit your own melody, scroll to Pictures &
Sounds, My Sounds, select the melody and press
. Select .
More Edit
To send a melody
1. Scroll to Pictures & Sounds, My Sounds.
2. Scroll to a melody,
More
3. Select Send.
4. Select a transfer method.
Note: To send a ring tone or melody in a text
message, see "To insert an item in a text message"
on page 46.
.
Receiving melodies
You can receive a sound or melody via IR, Bluetooth
wireless technology, text, picture message, or
download it via your browser. When you receive the
sound or melody, press
Increasing ring
You can choose a ring tone that rises in steps from
the lowest volume to the highest.
To turn increasing ring On or Off,
Scroll to Settings, Sounds and Alerts, Increasing Ring.
Specific ring tones for personal calls
If you subscribe to the Two Line Service,
you can set different ring tones for the two
voice lines. Line 1 and Line 2 are displayed
instead of Voice Calls.
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a
personal ring tone to up to ten callers.
To set a specific ring tone for a caller
1. Scroll to Phonebook, Personal Rings, New Contact.
2. Select a contact.
Personalizing your phone
to save it in My Sounds.
Save
21