Crosley ZE7009GW Use & Care Manual page 7

CYCLE GUIDE — TIMED CYCLES
Settings shown and options in bold are default settings for that cycle.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Adjusting drying time on Timed Cycles
When you select a Timed cycle,
the default time appears in the
+ –
display. Use the " " and "
buttons to increase or decrease
the time in 1-minute increments.
Touch and hold to change the
time in 5-minute increments.
The maximum dry time is 150 minutes.
Items to dry: Cycle:
Any load Timed Dry
NOTE: Select Air
Only to dry foam,
rubber, plastic,
or heat-sensitive
fabrics.
Small loads and Rapid Dry
sportswear
† You may select the "Wrinkle Prevent With Steam" setting to add a short steam cycle after 60 minutes. This is available only with High
and Medium Temperature settings.
Depending on settings, Steam option may be disabled to protect clothing and optimize performance.
CYCLE GUIDE — STEAM CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Items Cycle:
to refresh:
Mixed Loads Steam Refresh
(on some models)
†You may select the "Wrinkle Prevent With Steam" setting to add a short steam cycle after 60 minutes.
Load Size Recommendations
For best results, follow the load size recommendations noted
for each cycle.
Small load: Fill the dryer drum with 3–4 items, not more
than 1/4 full.
"
Temperature:
Temperature:
Selecting the Temperature
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A low-to-medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no-heat (air dry) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Default Available
Time: Options:
40 Wrinkle
Prevent
†
15 Wrinkle
Prevent
†
Available
Options:
Wrinkle Prevent
†
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Cycle Details:
Use to dry items to a damp level
for items that do not require an
entire drying cycle. Select a drying
temperature based on the type of
fabrics in your load. If you are unsure
of the temperature to select for a load,
select the lower setting rather than the
higher setting.
For small loads of 3–4 items.
Cycle Details:
Use to smooth out wrinkles and reduce odors
from loads.
7