Cycle Guide - Crosley ZE7009GW Use & Care Manual

CYCLE GUIDE — SENSOR CYCLES
Senses moisture in the load and shuts off when the load reaches the selected dryness level. The dry temperature shown is the
default temperature. This setting can be modified on some cycles but is not retained for future drying with this cycle. The dryness level
shown is the default dryness setting. This setting can be changed on some cycles and will be retained for future drying with this cycle.
Available options shown in bold are default settings for that cycle.
Use Sensor cycles for better fabric care and energy savings
To get the most energy savings and enhanced fabric care from your dryer, use the Sensing cycles. These cycles measure the drying
air temperature and moisture levels to turn the dryer off once the load reaches the selected dryness level. For electric models, dryer
performance and results may vary with service voltage less than 240.
Items Cycle:
to dry:
Sheets and Sanitize*
towels
Jackets, Bedding
comforters,
pillows
Heavyweight Heavy
items such as Duty
towels or heavy
work clothes
Work clothes, Normal
casual wear,
mixed cottons,
corduroys
Shirts, blouses, Wrinkle
permanent Control
press,
synthetics,
lightweight
items
Undergarments, Delicates
blouses,
lingerie,
performance
wear
* Extended high-heat drying cycle intended to help sanitize items such as sheets and towels. This cycle is not recommended for all
fabrics. For best results, do not interrupt cycle; this cycle should be run to completion to ensure sanitization.
† You may select the "With Steam" setting to add a short steam cycle after 60 minutes. This is not available on Sanitize or
Delicates. On Steam Models for these cycles, Wrinkle Prevent without Steam will be run to keep clothes protected and for optimal
performance.
Load Size Recommendations
For best results, follow the wet load size recommendations
noted for each cycle.
Small load: Fill the dryer drum with 3–4 items, not more
than 1/4 full.
6
Temperature: Dry Level: Available
Options:
Wrinkle Prevent This is a long cycle with high
w/o Steam heat which has been proven to
reduce household bacteria. This
cycle is not recommended for
all fabrics.
Damp Dry Use for drying large, bulky
Signal items; do not overfill dryer
Wrinkle Prevent drum. Partway through the
†
cycle, the signal will sound for
2 minutes to indicate when it
is time to rearrange items for
optimal drying.
Damp Dry Offers stepped drying, starting
Signal with High heat and followed by
Wrinkle Prevent Medium High heat for enhanced
†
Static Reduce fabric care and energy savings.
Damp Dry Starts at High heat, quickly
Signal goes to Medium High, and
Wrinkle Prevent then ends on Medium heat to
†
Static Reduce dry large loads of mixed fabrics
and items.
Damp Dry Uses a stepped drying
Signal temperature from Medium to
Wrinkle
Low for improved moisture
Prevent w/ removal and enhanced fabric
Steam care. Cycle is designed to help
Static Reduce reduce wrinkles.
Damp Dry Uses a stepped drying
Signal temperature from Medium
Wrinkle Prevent to Low to gently dry delicate
†
Static Reduce items.
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Cycle Details: