Led Indicators - SMC Networks Edge-corE NETWORKS BARRICADE SMCWGBR14-N2 User Manual

The wireless Router includes ten status LED indicators, as described in the
LED I
NDICATORS
following table.
Table 2: LED Behavior
LED
Power
System
WLAN
LAN (4 LEDs)
WAN
WPS
N
OTE
LED will remain on for about 5 minutes and then turn off.
Status
On
Off
On
Flashing
Off
On/Flashing
Off
On
Flashing
Off
On
Flashing
Off
On
Fast Flashing
Slow Flashing
Off
After a device is successfully added to the network by WPS, the WPS
:
– 14 –
C
HAPTER
Description
The unit is receiving power and is operating normally.
There is no power currently being supplied to the
unit.
The Router is initializing.
The Router is working properly.
The Router has a system error.
The 802.11n radio is enabled and
transmitting or receiving data through wireless links.
The 802.11n radio is disabled.
The Ethernet LAN port is connected to a PC or server.
The Ethernet port is connected and is transmitting or
receiving data.
The Ethernet port is disconnected.
The port has a valid connection to another device.
The port is connected and is transmitting/receiving
data.
The port is disconnected.
Indicates the WPS authentication of a device has
been successfully completed.
A wireless device failed to be added to the network by
WPS.
A wireless device is connecting to the network by
WPS. This process will last for 2 minutes.
The WPS is not in progress.
| Introduction
1
Front Panel