Acer Aspire iDea 510 User Manual page 58

50
Problems
No sound comes out of
the analog audio
output.
No sound comes out
when you play DVD.
I cannot find the
previously recorded
programs after system
recovery.
Possible solutions
Check the following:
• Make sure the speaker cables are properly connected to the
amplifier.
• Check the connection of the speakers to your system. See
"Selecting an A/V input source" on page 17.
• Disable Dolby Digital Live or DTS Interactive. if either one is
enabled.
• Make sure the speaker cables are properly connected to the
amplifier.
• Check the connection of the speakers to your system. See
"Selecting an A/V input source" on page 17.
• Make sure audio settings in Media Center are properly
configured.
To configure Media Center for multi-channel audio
output:
1 Open Media Center.
2 Click Settings >DVD > then Audio.
3 Under Speaker Environment, select the speaker number
that matches your system. For example, select 2 speakers
if you have 2 speakers, 8 speakers if you have 7.1 audio
system and 6 speakers if you have 5.1 audio system.
4 If you have a digital audio system, select Use SPDIF.
5 Press the OK button on the remote control or exit Media
Center Settings menu.
• Check the sound track format of the DVD.
• If you are playing DVD with Dolby sound track, you can
select Use SPDIF or multi-channel speakers
• If you are playing DVD with DTS sound track, select Use
SPDIF only.
• If you use SPDIF as your audio output, make sure that the
amplifier, A/V receiver or digital audio device supports
the proper decoder such as Dolby or DTS decoder and are
correctly set.
Note: If the DVD sound track only supports stereo format,
only the front speakerbs (stereo) will output sound.
Do the following:
• Regularly backup your media contents using Create CD/
DVD utility in More Programs.
• Set the TV recording to drive D:
7 FAQs