Table of Contents
Advertisement
Configuration with the Web browser
You do not need to install any software on your PC to configure your SE680 WiMAX
modem; the configuration program is stored on the device. Open this software in the
same way as an Internet page in the Web browser and make the required settings. Your
settings are then stored directly on the device.
On startup, the Basic Setup Wizard helps you set up a connection to the WiMAX net-
work and configure your Internet access.
For experienced users:
i
– IP address: 192.168.2.1
– Subnet mask: 255.255.255.0
Presentation of the configuration program
To configure your SE680 WiMAX modem, we recommend the Microsoft Internet
Explorer version 7.0, Mozilla Firefox version 2.0 or their higher versions. However, you
can also use most other or older Web browsers.
i
Number and amount of functions and settings provided by the configura-
tion program may differ specific to a project.
User interface
Launching the user interface
Open your Web browser.
Enter the IP address of your SE680 WiMAX modem in the address field of your Web
browser:
http://192.168.2.1
Press Enter (Return).
If a system password has been set up on your SE680 WiMAX, the login screen will now
open.
Enter the system password supplied by your provider in the text box and click Ok.The
start page (Home) of the user interface opens, in which you can change the language
if necessary (
page 18).
Change the system password later to one of your own (see "System password" on
page 31).
If no system password has been set up on your SE680 WiMAX, a security warning will
appear first. You should then assign a system password as soon as possible.
Confirm the security warning with Ok.
The user interface start page opens.
Configuration with the Web browser
15
Advertisement
Table of Contents
