Table of Contents
Advertisement
y
u i
o
!0
!1
!2
!3
Insert the fabric under the foot.
y
Turn the handwheel one complete turn by your
hand.
Remove the fabric to the left to draw both threads
u
to the left.
Insert the garment under the foot, and lower the
i
needle at the starting point.
Then lower the automatic buttonhole foot.
Sew slowly and stop the machine at the starting
o
point when a buttonhole is completed.
*The machine sews front bartack and left row first,
then the back bartack and right row.
Cut the both needle and bobbin threads leaving
!0
about 10 cm (4˝) thread ends.
Draw the needle thread to wrong side of fabric by
pulling the bobbin thread.
Then, knot the threads.
Insert a pin inside the bartack.
!1
Then cut the opening with a seam ripper.
Take care not to cut the stitches.
To repeat buttonhole sewing.
!2
After a buttonhole is sewn, move the indicator to
pattern "1" [ ] by turning the pattern selector dial
in the direction of arrow 1, then return the indicator
back to "BH" by turning the dial in the direction of
arrow 2 to reset for sewing the next buttonhole.
When buttonhole sewing is finished, push the but-
!3
tonhole lever upward as far as it will go.
25
Advertisement
Table of Contents
