Kenmore PG-40405S0L Use & Care Manual page 19

Cart
□ To attach side panels, align side panel holes with screw insert holes on each side of bottom
shelf. Note: Left side panel has match holder attachment.
□ Attach but do not fully tighten left and right side panels to bottom shelf with (6) M6x13 screws.
Leave a small gap beneath the screw heads for easier attachment of panels, brackets and bars
in the following steps on this page
□ Attach back panel to bottom shelf and two side panels with (8) M4x10 screws .(B)
□ Attach tank baffle bar to back panel and bottom shelf with (2) M4x10 screws. (C)
□ Align door bracket holes with holes on side panels. Attach door bracket to side panels with (4)
M4x10 screws. (D) Note: Attach bracket so that magnets are at
□ Align the holes in the cart support angle bars with holes on bottom shelf and side panels.
Attach angle bars with (8) M4x10 screws. (E) Now fully tighten the 6 screws attaching the side
panels to the bottom shelf.
M6X13 screw Qty: 6 pcs
M4X10 screw Qty: 22 pcs
B
D
(A)
.
top.
A
C
E
19