Static Ip - D-Link DSL-2878 User Manual

Section 4 - Configuration
Select Static IP if your ISP provides you with a specific IP address.
WAN Settings
Connection: Select Static IP Address.
WAN Service Type: Select a service type from the list. As of this writing, only Internet is
supported for manual configuration.
Connection Type: Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC (IPoA),
or Routed IP VC-Mux (IPoA). The IPoA options are available for ADSL
connections only.
IP Address:
Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Default Gateway: Enter the default gateway address provided by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
NAT Enable: Enable or disable Network Address Translation.
Click Save when you are done.
D-Link DSL-2878 User Manual

Static IP

32