Adsl - D-Link DSL-2878 User Manual

Section 4 - Configuration
ADSL is one of the first home broadband technologies introduced. ADSL uses
the DSL port on your DSL-2878 to connect to the Internet. In order for your
DSL-2878 to use ADSL, you must configure the WAN Connection Type and
your WAN Settings.
WAN Connection Type
Select ADSL to configure ADSL connection settings.
Configure your
WAN connection:
WAN Settings
Service Number: Select the service number from the drop-down menu. If no service
has previously been added, or you wish to add a new one, select Add.
Enable Virtual
Select whether to enable or disable this Virtual Circuit.
Circuit:
If you Enabled the selected interface, the following options are available:
VPI: Enter the Virtual Path Indicator (0 - 255).
VCI:
Enter the Virtual Channel Indicator (32 - 65535).
Service Category: Select the type of ATM traffic contract, UBR, CBR, NRT-VBR, or RT-
VBR.
If you selected UBR, CBR, NRT-VBR, or RT-VBR. the following option is available:
Vlan ID:
Enter the VLAN ID. Enter a value from 10 - 4096. The default value is
835.
D-Link DSL-2878 User Manual

ADSL

27