D-Link DSL-2878 User Manual page 19

Section 3 - Getting Started
Setup Wizard (continued)
If the router detected or you selected PPPoA, enter your PPPoA username and
password, choose the Connection Type if asked, and click Next to continue.
Note: Make sure to remove any previous PPPoA software from your computer. The
software is no longer needed and will not work through a router.
PPPoA connection type is only available for ADSL connections.
If you selected Static IP, enter the IP address, subnet mask, gateway address,
and DNS servers provided by your ISP, then choose the Connection Type if
asked. Click Next to continue.
D-Link DSL-2878 User Manual 15