Kenwood K-731-S Instruction Manual page 39

Presetting Stations Automatically (Auto Memory) R P.40
Related Related
Presetting Stations Manually (Manual Preset) R P.41
Information Information
Audio Settings R P.51 onwards
R-K731̲E.indb 39 R-K731̲E.indb 39
Choosing from stations that are not preset (Auto/ Manual Tuning)
1 Press the [AUTO/MONO] key to select Auto tuning or
Manual tuning.
The mode changes as shown below each time you press the key.
AUTO lit
Auto tuning
(Select this mode when
reception is good.)
2 Press the [TUNINGI/J] key to select a station.
When you operate on the main unit, press the [F] key and then
press the [I] or [J] key.
When the station is tuned, "TUNED" lights up on the display. If you
are receiving a stereo signal, "ST. " also lights up.
Using Auto tuning
The radio automatically tunes in to the next station each time
you press the key. Repeat this step until you are tuned in to your
preferred station.
Using Manual tuning
Press the key until the desired station is tuned or until you reach
the desired frequency.
There is no sound while Auto/Manual tuning is in progress.
Auto tuning provides stereo reception while manual tuning provides
monaural reception.
The display changes as shown below each time you press the [DISPLAY] key.
FM:
Program service name R Preset No. R Day/Clock
When the program service name is not stored:
Preset No. R "No PS" R Day/Clock
AM:
Preset No. R Day/Clock
Receiving Radio Broadcasts
AUTO unlit
Manual tuning
(Select this mode when
reception is poor.)
English
2011/10/07 14:08:45 2011/10/07 14:08:45
39