Kenwood K-731-S Instruction Manual page 37

R-K731̲E̲04.indd 37 R-K731̲E̲04.indd 37
4 4
To select two or more tracks, repeat steps 1- 2 to 3.
You can select up to 30 tracks. If you attempt to select more tracks, the
"Program Full" message is displayed.
5 5
Press the [USBE] key to begin playback.
To cancel program mode
Stop playback and press the [P.MODE] key so that "PGM" is no lon-
ger displayed.
To remove a track from a program
Stop playback and then press the [CLEAR] key. Each time you press
the key, the last programmed track is cleared.
To add a track to the end of the program
If you are already playing an audio fi le, stop playback and carry out
steps 1- 2 to 3.
If you turn the system off , switch to another input source or remove the
USB device for which program playback is set, the information in the
specifi ed program is erased.
USB
37
English
2011/10/26 10:00:14 2011/10/26 10:00:14