Humidifying Filters Replace; Maintenance - Daikin STREAMER MCK55W Operation Manual

Maintenance

Maintenance
Humidifying Filters
Replace about every 10 years*
About part replacement timing
• Replacement timing depends on usage patterns and the
location of the unit.
Standard replacement time is about 10 years assuming
that the filters are used 8 hours per day, 6 months per
year, and are cleaned periodically. Replace the
humidifying filters if dirt/stains cannot be removed or there
is a reduction in humidifying capacity (water usage rate).
Humidifying filter unit parts breakdown
Do not dispose of
the frame
Do not dispose of
axle
Do not dispose of
the frame
1.
Remove the frame and axle.
1 Release the frame hooks (6 places).
Hooks (6 places)
2 Remove the frame (upper half) and pull out the axle
from the frame (lower half).
Humidifying filter
(orange)
Humidifying filter
(blue)
2.
Remove the humidifying filters.
• Detach the humidifying filters from each frame.
27
Replace
Frame (upper half)
Humidifying filter
(orange)
Axle
Humidifying filter
(blue)
Frame (lower half)
Push frame hooks
in direction of arrow.
Frame
(upper half)
Axle
Frame
(lower half)
Illustration is example of
the frame (lower half) and
the humidifying filter (blue).
WARNING
Before cleaning and maintenance work, be sure to unplug
the unit. (An electric shock or injury may result)
* Time until humidifying capacity drops to 50% of the rated humidifying capacity
About purchasing and disposal
• Refer to "Separately Sold Parts".
3.
Attach new humidifying filters to each frame.
(Both humidifying filters have a front and back.)
• Align the protrusions (6 places) on each frame with
the holes in each filter. (Water leakage may result if
not correctly attached.)
Illustration is example of
the frame (lower half) and
the humidifying filter (blue).
Filter and frame combinations
• Attach the filters to the frames so that the colour and weaving
pattern of each filter matches the markings on the frame.
Humidifying
Frame
filter (orange)
(upper half)
4.
Attach the frames and axle.
1 Align the grooves in the frames (upper half and lower
half) with the projections on the axle when attaching.
Frame
Humidifying
(upper half)
filter
(orange)
Axle
Humidifying
filter (blue)
2 Insert the hooks (6 places) until you hear a catching sound.
►Page 29
Insert filter
securely under
each holding
member
(6 places)
Protrusion
(6 places)
Frame
Humidifying
(lower half)
filter (blue)
Frame
(lower half)