Chapter 6: Using The Tv's Features; Selecting The Video Input Source To View; Labeling The Video Input Sources - Toshiba 32DT1U Owner's Manual

Chapter 6: Using the TV's features

Selecting the video input source
to view
To select the video input source to view:
1無
Press on the remote control or TV control
panel.
2無
And then either:
a) Press 0–6 or 7; or
b) Repeatedly press pq on the remote control
and then press to change the input; or
c) Repeatedly press
or TV control panel to change the input.
The current signal source displays in the top right
corner of the Input Selection screen.
32" 40"
Input Selection ANT/CABLE
0 ANT/CABLE
1 Video
2
ColorStream HD
3
HDMI 1
4
HDMI 2
5 PC
6 USB Media
0 - 6 / INPUT to Select Navigate
Note:
• You can label the video input sources
according to the specific devices you have
connected to the TV ( "Labeling the video
input sources" at right).
• Sources can be "hidden" ( "Labeling the
video input sources" at right).
• "No Video Signal" will appear randomly on the
screen if no signal is received in video input
mode.

Labeling the video input sources

You can label each video input source according to
the type of device you connected to each source,
from the following preset list of labels:
– – (default label)
•
Audio Receiver
•
Cable
•
Compact Disc
•
DTV
•
• DVD
Game Console
•
HDMI Switch (HDMI inputs only)
•
Laser Disc
•
Satellite/DSS
•
28
on the remote control
VCR
•
Video Recorder
•
Hide (to hide an unused input in the Input Selection
•
screen and in the Channel Browser™ Inputs list)
Note: If you select PC in the Input Selection
screen, you can choose only "– –", "Game
Console", or "Hide" as the label.
To label the video input sources:
1無
Press and open the Preferences menu.
2無
Highlight Input Labeling and press
3無
Press p or q to highlight the video source you
want to label.
32" 40"
Game Console
4無
Press t or u to select the desired label for that
input source. If a particular input is not used, you
can select Hide as the label, which will cause that
input to be "grayed out" in the Input Selection
screen and skipped over when you press
the remote control.
5無
To save the new input labels, highlight Done and
press .
To revert to the factory default labels, highlight
Reset and press
.
.
on
(continued)