Setting The Antenna Power; Setting The Permanent Timeshift; Setting A Recording Storage Location - LG HR599D Owner's Manual

Twin hd recorder/blu-ray combo
Table of Contents

Advertisement

2
Installation
Setting the antenna power
If you are using indoor antenna with a signal
amplifier rated at DC 5V, 100mA, the recorder
can supply power through ANTENNA IN jack.
1. Display [Setup] menu.
2. Use U / u / I / i to select [Antenna Feed 5V]
and press ENTER
3. Use U / u to select [On], and press ENTER
to supply antenna power.
( )
3
NOTE
The [Antenna Feed 5V] option must be set to [Off ]
when your indoor antenna is supplied the power
from the mains. If you set the [Antenna Feed 5V]
option to [On] for the indoor antenna which is
supplied power from the mains, it may cause
serious defect to this unit.
Setting the permanent
Timeshift
You can set the Time Shift function
automatically without pressing TIME SHIFT
button. The timeshift will start after Digital TV
tuner mode is started.
1. Display [Setup] menu.
2. Use U / u to select [DTV], and press ENTER
.
( )
.
( )
3. Use U / u to select [Permanent Timeshift]
and press ENTER
( )
4. Use U / u to select [On] to apply permanent
timeshift.
Setting a recording storage
location
You can set the storage location where you
want to store the DTV recordings.
1. Display [Setup] menu.
2. Use U / u to select [OTHERS], and press
ENTER
.
( )
3. Use U / u to select [REC Device] and press
ENTER
.
( )
4. Use U / u to select a storage location, and
press ENTER
.
( )
NOTE
This option is not available while recording.
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr598d

Table of Contents